Palatec
Merchant bars and round bars
Our wide range of products includes merchant bars and round bars in different material qualities. The products are available with partial millimeter sizing and improved machinability qualities in merchant and round bars. With the help of partial millimeter measurement, your company saves time and money when the dimensions of the raw material are as close as possible to the dimensions of the finished machined part. The machining time is significantly reduced and the proportion of raw material waste is reduced.
Round bars
Square bars
Flat bars and key steels
Angle bars
Hexagon bars
Merchant bars and round bars material qualities
- Structural steels examples EN 10025:
C10, C15, S235JRC, S275, S355J2C etc. - Free-cutting steels example EN 10277:
11SMnPb30+C, 11SMn30+C, 11SMnPb37+C, 36SMnPb14, 46S20, 46SPb+C etc. - Tempering and case hardening steels example EN 10083, EN 10084:
C15Pb, C15E, 16MnCrS5, 18CrNiMo7-6, 25CrMo4, 25CrMoS4, 34CrNiMo6, 42CrMo4, 42CrMoS4+QT, C45, C45E+C, CK45+Pb etc. - Special steels: boron steel, spring steel, refractory steel, valve steel, tool steel etc.
- Stainless and acid-resistant steels example EN 10088 and EN 10028:
EN 1.4305 / AISI 303, EN 1.4301 / AISI 304, EN 1.4307 / AISI 304L, EN 1.4401 / AISI 316, EN 1.4404 / AISI 316L, EN 1.4571 / AISI 316Ti, EN 1.4509 / AISI 441 etc. - Aluminium example EN 755:
EN AW-2007, EN AW-2011, EN AW-5083, EN AW-5754, EN AW-6026,
EN AW-6026 LF, EN AW-6060, EN AW-6073, EN AW-6082, EN AW-7075 - Brass example:
CW602N / MS 362, CW614N / MS 358 etc. - Copper example EN 12163, EN 12164, EN 12167:
CW004A, Cu-OF CW008A, CW118C etc. - Bronzes
- Special metals example: Titanium, Hastelloy, inconel